RME FIREFACE 802

• An impressive 30-in/30-out hybrid audio interface with high-speed USB and FireWire connectivity
• 12 analog inputs include TRS line jacks and 4 combination DI/XLR microphone preamps based on the acclaimed OctaMic II
• RME's top-shelf converters with active jitter control deliver extreme clarity and superb stereo imaging
• Optical and XLR digital I/O support up to 18 channels including ADAT, SMUX, and AES/EBU protocols
• DSP-driven mixer offers latency-free monitoring with EQ, dynamics, reverb, and delay
• Setup mixes and complex routing from your computer or iPad
• RME's Advanced Remote Control (NOT INCLUDED) offers full monitor control and custom commands to enhance your workflow

• 
  

• SPECIFICATIONS

  AD, Line In 1-8, rear

  • Resolution AD: 24 bit
  • Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA
  • Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.8 kHz
  • Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45.8 kHz
  • Frequency response @ 192 kHz, -1 dB: 5 Hz – 92 kHz
  • THD: < -110 dB, < 0.00032 %
  • THD+N: < -104 dB, < 0.00063 %
  • Channel separation: > 110 dB
  • Input: 6.3 mm TRS jack, electronically balanced
  • Input sensitivity: 8 kOhm unbalanced, 12 kOhm balanced
  • Input sensitivity switchable to Lo Gain, +4 dBu, -10 dBV
  • Input level for 0 dBFS @ Lo Gain: +19 dBu
  • Input level for 0 dBFS @ +4 dBu: +13 dBu

  DA – Stereo Monitor Output Phones (9-12)

  As DA, but:

  • Output: 6.3 mm TRS stereo jack, unbalanced
  • Maximum output level at 0 dBFS, High: +16.8 dBu
  • Maximum output level at 0 dBFS, Low: +2 dBV
  • Output impedance: 30 Ohm

  AES/EBU

  2 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992

  Microphone In 9-12, front

  As AD, but:

  • Input: XLR, electronically balanced
  • Input impedance: 3.4 kOhm
  • Signal to Noise ratio (SNR): 112 dB RMS unweighted, 116 dBA
  • Gain range: 54 dB
  • Maximum input level, Gain +6 dB: +10 dBu

  Instrument In 9-12, front

  As AD, but:

  • Input: 6.3 mm TS jack, unbalanced
  • Input impedance: 800 kOhm
  • Signal to Noise ratio (SNR): 112 dB RMS unweighted, 115 dBA
  • Maximum input level, Gain +6 dB: +21 dBu

  DA, Line Out 1-8, rear

  • Dynamic range (DR): 115 dB RMS unweighted, 118 dBA
  • Frequency response @ 44.1 kHz, -0.5 dB: 5 Hz – 20.8 kHz
  • Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 45 kHz
  • Frequency response @ 192 kHz, -1 dB: 5 Hz – 89 kHz
  • THD: -110 dB, < 0.00032 %
  • THD+N: -104 dB, < 0.00063 %
  • Channel separation: > 110 dB
  • Output: 6.3 mm TRS jack, servo-balanced
  • Output impedance: 75 Ohm
  • Output level switchable Hi Gain, +4 dBu, -10 dBV
  • Output level at 0 dBFS @ Hi Gain: +19 dBu
  • Output level at 0 dBFS @ +4 dBu: +13 dBu
  • Output level at 0 dBFS @ -10 dBV: +2 dBV

  ADAT OPTICAL

  • 2 x TOSLINK I/O, format according to Alesis specification
  • Standard: 2 x 8 channels 24 bit, up to 48 kHz
  • Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
  • Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
  • Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz

  SPDIF OPTICAL (VIA ADAT2)

  • 1 x optical, according to IEC 60958

  WORD CLOCK

  • BNC, switchable termination