SUB 10
Description
SUB 10 is a professional active studio subwoofer, designed for accurate sound realization.
SUB 10 is a professional active studio subwoofer equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.
SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.
This subwoofer is suitable for small/mid-sized:
recording studios,
broadcasting studios,
TV studios,
multimedia studios,
post production facilities,
mastering,
digital workstations,
home recording studios,
audio monitoring systems of the highest quality.
Finishes
All our speakers are available in either color or natural wooden finish. In both cases it possible to order either matt or polished versions. We can customize the speaker to any finish available on the market on client's request.
Example finishes:
Click on the colour to see it on the speaker.
Technical specifications
Subwoofer
Type |
Active – Class D power amplifier Hypex: 400 W @ 4Ω |
Dimensions |
Height x Width x Depth
39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75" |
Free Field Frequency Response |
±2.5 dB: 19-90 Hz |
SPL in Free Field @ 1m |
RMS: 108 dB (single subwoofer)
Peak: 116 dB (pair of subwoofers) |
Weight |
24 kg / 53 lbs |
Calibrated Controls
Input Sensitivity Switch / VOLUME (8 positions) |
-4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB |
Input Sensitivity Switch / VOLUME (3 positions) |
-20dB, -10dB, 0dB |
Low-pass filter Switch CUT OFF |
40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz |
Filters By-Pass Switch UNFILTERED (LFE) |
Position down: filters ON
Position up: filters OFF |
PHASE Switch |
0 degrees, 180 degrees |
STAND-BY Switch |
Position down: active STAND-BY
Position up: continuous mode (Stand-by OFF) |
Loudspeaker
Subbass Loudspeaker |
Ø 29 cm
Diaphragm: cellulose, surround: rubber |
Amplifiers
Subbass Loudspeaker Power Amplifier |
400 W RMS @ 4 Ω (270 W RMS @ 6 Ω) |
THD distortions |
Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2
Max 0.04% 20Hz<f<20kHz, Pout = 1W |
Inputs, Outputs
INPUT right (R) and left (L) |
Two types (common socket Combo):
- XLR symmetrical (balanced)
- TRS symmetrical (balanced) "6.3 mm"
and RCA nonsymmetrical
Input impedance 10 kΩ |
„Loop Through” Output |
XLR symmetrical, Output impedance 100 Ω |
Protections
Subbass Loudspeaker Protection |
Pop-free start and stop control |
Power Amplifiers Protections |
Overcurrent protection |
Power Amplifiers Protections |
Overvoltage protection |
Signaling Devices
STAND-BY ON |
Orange LED |
CLIPPING detected |
Red LED |
POWER ON / DC-error detected |
Green LED / Red LED
|
